Hammer Bench
One Man Operation
The Universal Hammer Bench is designed to make hammer maintenance a one man job. It is the easiest method for one of the most difficult problems for drillers...breaking down and assembling the Down-The-Hole-Hammer. The optional crane allows one person to lift the hammer off the ground or service truck, place it in the saddle, break the hammer apart, completely service, assemble, torque to specs and lay the fresh hammer and bit on your hammer rack or back on your service truck without the use of a fork lift or overhead crane.
Reduced Cost Per Foot
The Universal Hammer Bench is designed to be a self contained work station to service and perform maintenance on Down-The-Hole-Hammers safely, efficiently and economically. The service of the limited life components inside the hammer greatly increases your production rates and extends the life of the Down-Hole Hammer. The Break-Out Bench is another tool to help you accomplish the lowest total hammer drill cost.
SPECIFICATIONS
Hammer sizes: 4” to 12”
(adapter required for 10” & 12” hammers)
60,000 ft. lbs. available torque
Weight: 1,500 lbs. - 1,700 lbs. with crane
Height: 45” without crane
11’ with crane boom extended and raised
Base Size: 62” x 40”
Powder coated for durable finish.
OPTIONS
Crane Assembly (shown) Rated 1,500 lbs.
Remote for breakout cylinder
Gasoline powered for remote operations
Customized benches available upon request
Adapter Kit
Super Duty Hammer Bench
60” Modified Wrench
Safety Screen
MODELS
UHB - 4” to 12” OD Hammers w/Adapter Kit
HEAVY DUTY—6” to 12” OD hammer no adapter needed
SUPER DUTY—4” to 20” with Interchangeable tops
